Many people have asked me for more details on how I used the hog clips to reduce the waste when warping my loom. The following are some pics and an explanation. Please use the comments option at the end for questions or comments so I don't have to dredge through all the news groups and listserves.

This pic shows the 3/8" clips and the special pliers with a clip inserted ready to use. The clips come in several sizes but I find 3/8" just right for a bundle of 25 2/6 warps.

Here we see a view of the rear beam and how I use the clips to prevent the warp from slipping around the smooth steel rod. This problem is likely unique to my design and may not be necessary for more conventional looms.

This is a view of the front beam tied off , tensioned and ready to start weaving.
The bundle is divided roughly in half and a line is passed through the space and in front of the clip. It is brought back over the beam and under the roller. It is wrapped a few turns around the head of a wood screw in the roller and a piece of scotch tape is used to prevent it from unwinding.
As can be seen, the yarn wasted is less than two inches.
The clips and tool can be purchased from Allied Kenko among many other places.
Any questions... comments?
js